-
A fully supported extended awning with
Roof Rafter System and Screen Panel System to give you the best of the
outdoors
- designed for trailer use.
-
Remove vinyl top easily for winter
storage.
- Not recommended for a snow load.
-
U - channel
deck attach
system allows removal of screens easily, if required by park management.
-
Back wall height is set at 91” –
specifically for trailers - with a drop to 75” at the front.
-
The panels that would
typically attach to the house wall have been shimmed with a foam backed
vertical support, eliminating the need to screw the unit into the
trailer sides.
-
Built-in flexibility so
that normal movement of deck and trailer will not put stress on the
screened room, nor the trailer
-
Horizontal mounting rail
may be put on the trailer in the same place as the old awning rail. Eliminates the need
for additional holes in the trailer wall
-
Complete with Heavy Duty Vinyl top, gable
ends, mounting rail, roof rafter system, adjustable leg supports.
-
The support bar on the
inside of the screen
panels is
1/3
from the bottom on all panels. This means that you have
a clear line of
sight when seated.
-
Roof
tensioning system is built into the end of the roof rafters and is
accessed from within the overhang using
a large thumb nut for ease of operation.
-
The
combination of roof overhang, roof tensioning system and roof pitch
means that water puddles are eliminated.
-
All panels are bolted
together. No silly
cables or plastic pieces. The room MUST be
screwed to a deck or patio. This is a
very high quality, long
lasting aluminum framed room that is easily assembled in a
few hours.
-
The
triple ply, heat sealed (welded joints),
14 ounce soft vinyl roof is made to last!
Frame is 1 1/4" x 1/2" aluminum with baked on enamel finish
- in white or taupe.
Vinyl Top Color Choices - Hunter Green, Dark Blue, Gray, Taupe or White
Privacy panels / wind breaker panels are available. Simply snap them
in behind the screen. Designed to extend the seasons.
Full one
year warranty
Non Retractable
with Front Poles for support in the open length area
-
Designed
for easy setup on the trailer deck
-
Attaches
to your home, cottage
or trailer wall
-
Some
minor customization available
-
Top
easily slides off the front for
winter storage
-
Smooth Rolling Sliding doors standard - specialized top rail roller system allows for a strong, easy sliding door.
-
1"
galvanized steel roof rafters
-
Easy
to assemble in 4 - 6 hours
-
All pricing in CDN
Dollars
